Life Is Such A Sweet Insanity.

When we moved from Upstate New York to Chicago in 2017 I donated much of my school clock collection to family and the local Historical Society. The Historical Society is located in one of the old elementary schools in my home school district and they’ve installed the clocks but they’re not running yet. The next time I’m back east I’ll get them running. Apparently several visitors to the building have commented about the old clocks.

I had a few clocks that made the move from storage in Chicago to our home here in Tucson. Running wire throughout this house is not an option, as we have no attic or basement. However, there are a couple of places when I can pull wire without too much destruction so maybe I’ll get one or two going.

When the clocks were in the old house they were initially run by a master clock (the type of which would be found in an office of a school or commercial building) from 1957. That clock gave up the ghost and parts were hard to come by, so I ended up writing some software to run on a 1996 era IBM PC (Pentium III) that ran the clocks for about eight years. A terrible energy hog, I was determined that if I ever had the opportunity to get the clocks running again, I’d do it with 21st century technology.

Today I started up one clock with a Raspberry Pi 3 and relay board. Less than 100 lines of code and this 1939 Standard Electric Time slave clock is running flawlessly and synced to the Atomic Clock in Boulder, Colorado courtesy of a WiFi Internet Connection.

To give you a sense of the size of the computer running this clock, here it is, in a temporary box, next to a standard pair of scissors.

By the way, the clock in question is originally from Cassadaga Valley Central School in Sinclairville, New York. They were doing some major renovations in the school in the early 2000s and replaced the clock system. I had been in the school a couple of times in the 1980s and knew they had the same type of clock system I collected. They were happy to let me have one or two clocks for my collection, as they were just getting thrown away.

Perhaps they needed a little Raspberry Pi that fits inside a small box to get things going again.

Yesterday Apple announced they would be delaying the release of their new “CSAM scanning” software originally slated for upcoming iOS15. For those unfamiliar, CSAM is short for Child Sexual Abuse Material, and the majority of the cloud providers (Google, Dropbox, Microsoft, and Apple) scan photos uploaded to their servers for this type of thing. This is a good thing. Getting the trafficking of CSAM under control is very important and actually a no-brainer. No one wants to see children abused in any way, including this way.

Apple’s intended release was to scan devices BEFORE the image made it to their servers. So, if you used iCloud to store your photos, Apple’s new software would scan the image before it made its way to the cloud, using the horsepower of your device, and on your actual device. The scanning is done based on hashes and these hashes are compared to a third party list of offending hashes. A hash is basically a binary/numeric representation of an image, not the actual image. So, if Apple found a photo’s hash that matched a listed hash, there could be trouble. The system is not 100%, but Apple assured folks there was a one in a million chance of a false positive.

Many security professionals much smarter than me, and security minded folks like me, obviously want to end the exchange of CSAM. CSAM is bad. But essentially building software that is a back door into anyone’s device to scan all cloud-bound images for this material is really bad. Apple promised this scanning would be used for this purpose and this purpose only, but once a back door is created, it can be exploited. It can be abused. Not to mention bad actors putting non-CSAM images on the hit list, for example LGBTQ+ themed images identified in a country that doesn’t like that sort of thing.

Apple has ramped back the release to re-evaluate based on customer feedback, consumer group concerns, etc.

It’s still not a good idea. If the images are on a cloud server, have at it. But scanning images directly on a device, which is essentially the same as inviting Apple to come into your house every night and rifle through your cabinets, wallets, etc., is a very bad idea. No one would allow this in the real world. We shouldn’t give up our digital privacy so easily.