Placement.

Our new home has nite lights wired throughout the hallways and stairwells. These little lights have LED bulbs, are fit into a standard-sized outlet box, and have downward pointing shades so the walkways are illuminated. When we moved in they were all wired to standard three or four-way switches.

There’s three circuits of these lights. The third circuit illuminates the stairwell that goes to our guest room. I was going to replace the switch this evening; when the project was completed then all three sets of lights would be controlled by home automation.

Except the stairwell bannister passes directly in front of the switch in question. There is a one-inch gap between the wall and the bannister. I decided tonight was not the night to tackle this. I’m pretty sure I’m going to need to take the bannister off the wall to swap out this switch.

There are several interesting design choices in this house and this is one of the examples. At times we’ve found the wiring to be equally creative, but we’re getting that part figured out.

I just don’t understand why someone would install a switch and then place a bannister directly in front of it.